Description

The Dyness STACK314-10S is a ten-module high-voltage (HV) LiFePO4 battery in two columns: 160.8 kWh nominal capacity, 152.8 kWh usable energy (95% DOD). It is the first configuration whose recommended power exceeds 70 kW, so the 10S is naturally paired with a 100 kW class hybrid inverter in production, a cold-storage warehouse or a farm – the battery delivers the full power of a 100 kW inverter for an hour and a half, or covers a 20–30 kW base load for the whole evening.

Capacity and power

Ten 16.08 kWh modules operate in the 448–584 V range (nominal voltage 512 V). The recommended 140 A current corresponds to 71.7 kW, the maximum continuous 200 A to 102.4 kW. Compared with the 9S, Megarevo MEGA0100TS appears in the list, but the 10S is the last variant marked with Solis S6-EH3P(3–10)K-H – this small inverter is not suitable for larger configurations. Expansion – five more modules into the same two columns (up to 15S).

Installation and location

The expansion kit is included: a second base (133 mm), a cover (80 mm), 50 mm² cables linking the columns and a communication cable. The SBDU200 controller stands in the main column; the modules stack without internal wiring, and both columns are secured with the included wall brackets. Two 770 × 425 mm footprints, total weight about 1,188 kg plus 18.5 kg – a concrete floor only. Indoor installation (IP20); charging from 0 °C, discharging from −20 °C, optimum temperature 18–30 °C.

Inverter compatibility

In the Dyness list (06/2026) ten modules are marked with ATESS HPS 30/50/100/120/150 and HPS30000/40000/50000TL, Deye SUN-29.9–50K-SG01HP3-EU-BM3/4 and SUN-60–80K-SG02HP3-EU-EM6, Growatt WIT 29.9–50K-XHU, Hiconics MH-HYIV29.9/30.0-TH, Megarevo MEGA0100TS (from 10S), Solinteg MHT-25–50K-100, M2HT-25–50K-150 and M2HT-75–125kW-300, Solis S6-EH3P(3–10)K-H, (12–20)K-H, (29.9–50)K-H and (75–125)K10-NV-YD-H, Sosen SSE-HH30-60K-P3 and SRNE IESP 50–60kW. Communication is CAN or RS485; we check your inverter model against its label before you order.

Safety and warranty

Ten aerosol extinguishers (one per module), a DC breaker in the controller, BMS with cell balancing; more than 8,000 cycles (0.2C, 25 °C), UN38.3 and IEC 62619. Warranty – 10 years under the Dyness warranty terms; registration and firmware updates (OTA) through the Dyness app.

Technical specifications

Capacity

160.8 kWh (10 × 16.08 kWh)

Usable energy

152.8 kWh (95% DOD)

Depth of discharge (DOD)

95%

Power

71.7 kW recommended (140 A), max. 102.4 kW (200 A)

Voltage

512 V nominal, operating 448–584 V

Current

140 A recommended (0.45C), 200 A max. continuous

Charge cycles

≥ 8,000 (0.2C, 25 °C, 95% DOD)

Operating temperature

Charge 0…+55 °C (with heating −20…+55 °C), discharge −20…+55 °C

Communication

CAN / RS485 (RJ45) to inverter; Wi-Fi + Bluetooth for the app

Dimensions (W×D×H)

Two columns of 770 × 425 mm; up to 8 modules per column

Weight

approx. 1,188 kg + 18.5 kg expansion kit

Protection

IP20, indoor; aerosol extinguisher in every module; DC breaker

Compatibility

Dyness list: ATESS, Deye, Growatt, Megarevo, Solinteg, Solis 3–125 kW, Sosen, SRNE

In the box

SBDU200 controller, 10 S51314 modules, expansion base and cover, linking cables

Warranty

10 yr. under Dyness warranty terms