Description

The Solplanet Ai-HB Pro 150A is a six-module high-voltage tower, 15.36 kWh (usable 14.59 kWh), 307.2 V, 202 kg, 990 mm. The Ai-HB G2 Pro configuration we offer most often: the capacity matches the 15 kWh limit of the planned APVA call, so the compensation is used in full, and 15.36 kWh is enough for a house with a heat pump and a 10–15 kW three-phase Solplanet hybrid plant.

Capacity and power for a house with a heat pump

With the ASW10kH-T3 (battery current 30 A) six modules deliver about 9.2 kW – almost the inverter's full 10 kW battery power; the heat pump, the oven and hot water heating run together in the evening. The tower's own limit is 50 A (15.36 kW, 1C). When there is not enough sun, in the inverter's Time of Use mode the storage is charged from the grid at the cheaper night tariff and feeds the heating during the day.

When to choose the 150A

If your evening and night consumption exceeds 10 kWh, or you want to use the full APVA limit – this is your variant. The 125A stays below the limit; the 175A and 200A exceed it, so no compensation is calculated for the remaining capacity. Later, two modules can be added on the same BCU (up to 20.48 kWh).

Installation and location

A 540 × 390 mm base on solid concrete or masonry, a 990 mm tall tower, the BCU on top fixed to the wall with two L-brackets. IP65 – a garage, a boiler room or outdoors under a roof, not in direct sunlight; discharge from −28 °C, charge from +2 °C. Voltage window 240–350.4 V.

Inverter compatibility

On the Solplanet list (v1.10): ASW05–12kH-T2, ASW08–12kH-T3, ASW05–12kH-T2-DG, ASW08–15kH-T3-DG, ASW015–030K-TH; CAN over the RJ45 Link Port to the inverter BMS port, Ai-HB G2 Series selected in the app. Not listed for single-phase Solplanet hybrids. We check your inverter model against its label before the order.

Safety and warranty

LiFePO4 cells, an aerosol extinguisher in every module, a circuit breaker in the BCU, 8,000 cycles. AISWEI warranty – 10 years or up to 43.77 MWh of delivered energy, whichever comes first. Under the terms of the planned 2026 APVA call the compensation is calculated per capacity (170 €/kWh, up to 15 kWh) – the 150A uses this limit in full.

Technical specifications

Capacity

15.36 kWh (6 modules × 2.56 kWh), 50 Ah

Usable energy

14.59 kWh (95 % DOD)

Power

15.36 kW charge / discharge (50 A, 1C); with ASW kH-T3 (30 A) apie 9.2 kW

Voltage

307.2 V nominal; operating 240–350.4 V

Charge cycles

8,000 (90 % DOD, 70 % EOL, 0.2C, 25 °C); efficiency ≥95 %

Operating temperature

Charge +2 to +58 °C, discharge −28 to +58 °C; humidity 5–95 %

Communication

CAN via RJ45 Link Port to the inverter BMS port; SOC and status LEDs

Compatibility

Solplanet ASW05–12kH-T2, ASW08–12kH-T3, T2-DG, T3-DG (up to 15 kW), ASW015–030K-TH

Protection

IP65; aerosol extinguisher in each module, circuit breaker, BMS protections

Dimensions (W×D×H)

540 × 390 × 990 mm

Weight

202 kg (incl. BCU and base)

Mounting

Floor standing (concrete / masonry), BCU wall-fixed with 2 L-brackets; indoor or outdoor, out of direct sun

In the box

BCU with base, 6 HB051050B modules, battery cables, terminating resistor, L-brackets, screws

Warranty

10 yr per AISWEI terms (or 5 + 5 yr), up to 43.77 MWh throughput